Sony HBD-E780W Service Manual page 32

HBD-E780W/E980W/E985W
(Screen 1)
System Information
Model :
Destination :
Sequence Number :
MAC :
IP :
IF-con Block0 Version :
Bootloader Version :
Host Main Version :
Host Sub Version :
Middleware Version :
ADSP Version :
2nd DSP Version :
IF_MODEL :
IF_DEST :
HELP: [RET] [RIGHT]
(Screen 2)
System Information
WLAN module Serial :
WLAN module hw Version :
WLAN module MAC Address :
Drive Firm Revision :
CD DIOP :
DVD DIOP :
BD DIOP :
CD LD TIME :
DVD LD TIME :
BD LD TIME :
HELP: [RET] [LEFT]
28
Block1 Version :
16. Drive
This menu is used to operate the drive using drive-related diagnos-
tic and tools.
Screen 1: Selecting items under *Drive
Operation:
[ ]/[ ] Selects the category
< ,
[ ]/[ ] Activate the selected category
m
[RETURN] Returns to the top menu of the service mode
[1] Drive OP data Write
[2] Servo Parameter Check Menu (Not used)
[3] Servo Signal Check Menu (Not used)
[4] S-Curve Check Menu (Not used)
[5] Readability Check Menu (Not used)
[6] OP Position Check Menu (Not used)
[7] OP Check Menu (Not used)
[8] Load Eject Aging (Not used)
[9] Spindle Control Check Menu (Not used)
[10] FA Test Mode (Not used)
Screen 2: To start OP data Write
Operation:
[ ] Starts
Screen 3: Show OP data Write result
Operation:
NG - USB is not f nd
NG - File (Butada.txt) is not f nd
OK - OP data write
• Drive Test
For drive operating check. Service is only use Drive OP data write
to rewrite OP data after change of new CPU.
Drive
[1] Drive OP data Write
Drive OP data Write
Insert USB StorageDevice ...
Remove DISC and Close tray.
[ENT] Start
(Screen 1)
HELP: [ENT] [RET]
(Screen 2)
Drive OP data Write
Insert USB StorageDevice ...
Remove DISC and Close tray.
[ENT] Start
NG - USB is not find
NG - File(Butada.txt) is not find
OK - OP data write
HELP: [ENT] [RET]
(Screen 3)