VTech DS6621 Abridged User Manual page 8

You can choose from different ringer tones.
1. Press when the handset is not in use.
2. Scroll to , and then press
3. Scroll to choose
4. Press or to sample each ringer tone, and then press
If you turn off the ringer volume, you will not hear ringer tone samples.
If you subscribe to caller ID service, the day, month, and time are set automatically
with each incoming call. You can also set the date and time manually.
1. Press when the handset is not in use.
2. Scroll to , and then press
3. Use the dialing keys ( - ) to enter the month, date, and year, and then
press .
4. Use the dialing keys ( - ) to enter the hour and minute.
5. Press or to choose
• Press or , and then dial the telephone number.
• Press . Enter the telephone number and then press
• Enter the telephone number and then press
• After first pressing
select the desired cell device when necessary, and then press
• While using the cell line, place your cell phone closer to the telephone base, and
make sure that there are no physical obstacles between the telephone base and
the cell phone, such as large furniture or thick walls.
• Press ,
• Press , or put the handset to the telephone base or charger.
• During a call, press to switch between speakerphone and normal handset use.
• During a call, press
The handset earpiece volume setting and speakerphone volume setting are independent.
The mute function allows you to hear the other party but the other party cannot hear you.
1. During a call, press
2. Press again to resume the conversation. The handset displays
.
When you subscribe to call waiting service from your telephone service provider,
you hear an alert tone if there is an incoming call while you are on another call.
• Press to put the current call on hold and take the new call.
• Press to switch back and forth between calls.
• Press to put the current call on hold and take the new call.
• Press to switch back and forth between calls.
When the telephone is ringing, you can temporarily silence the ringer of the handset
without disconnecting the call. The next call rings normally at the preset volume.
• Press or on the handset. The handset displays
If you have pulse (rotary) service only, you can switch from pulse to tone dialing
temporarily during a call.
1. During a call, press
2. Use the dialing keys to enter the relevant number. The telephone sends touch-tone
signals. It automatically returns to pulse dialing mode after you end the call.
.
or , and then press
.
or , and then press
, you may need to choose a cell device. Scroll to
, , or any dialing key.
or to adjust the listening volume.
. The handset displays
.
8
.
to save.
to save.
to dial.
to dial.
.
.