VTech DS6621 Abridged User Manual page 11

1. Press when the phone is not in use.
2. Scroll to , and then press
3. Scroll to , and then press
4. Press to choose
1. When the desired entry displays, press
2. Use the dialing keys to edit the number, and then press
3. Use the dialing keys to edit the name, and then press
1. When the desired caller ID log entry displays, press
2. Scroll to
3. Use the dialing keys to modify the number, and then press
4. Use the dialing keys to modify the name, and then press
• When the desired call block list entry displays, press
1. Press when the phone is not in use.
2. Scroll to , and then press
3. Scroll to
4. Scroll to choose
For message recording, your telephone has a built-in answering system, and
it also support voicemail service offered by your telephone service provider
(subscription is required, and fee may apply).
The main differences between them are as follows:
Storage Messages are stored in the telephone base.
Maximum This depends on the design of telephone
number of base. You cannot change the maximum
messages number of messages that can be recorded.
Method Usually, there are two ways to retrieve messages:
to retrieve
• Press a button on the telephone base; or
messages
• Access remotely with an access code.
Your answering system has various features, read below for the basic settings.
Default settings are indicated by asterisks(*).
Play, record, or delete an announcement for
incoming calls.
Delete all old (reviewed) messages.
Record a memo as reminders for yourself or others
using the answering system.
Turn on or off the answering system.
Follow audio instructions to set basic features.
Change the settings of call screening, number of rings,
remote code, or message alert alone.
• Call screening
Set whether you hear the callers while they are leaving
messages to you.
• # of rings
Set the number of times the telephone rings before the
answering system answers.
• Remote code
Set a two-digit security code to access the answering
system remotely from any touch-tone telephone.
• Msg alert alone
Set to alert you when you have new messages.
.
.
.
.
then press .
.
, and then press
or , and then press
11
.
to save.
.
.
to save.
.
.
.
Messages are stored in a server
or system provided by your
telephone service.
This may vary with your
telephone service plan (fee
may apply). Contact your
telephone service provider for
more information.
To retrieve messages, you
need an access number and/or
a secret code provided by your
service provider.