VTech DS6621 Abridged User Manual page 6

• On when the handset is in use,
or the answering system is
answering a call.
• Flashes when there is an incoming
call, or another telephone sharing
the same line is in use.
• Delete the playing message.
• Press twice to delete all previously
reviewed messages when the
phone is not in use.
• Press to page all system handsets.
• Press to repeat a message.
• Press twice to play the previous
message.
• Turn the answering system on or off.
• Press to connect the paired
Bluetooth device.
• Press and hold to add or replace a
Bluetooth device.
To use a Bluetooth enabled cell phone with your
connect your Bluetooth cell phone(s) with the telephone base. All
can be used to make or answer calls on the cell line.
Bluetooth wireless technology operates within a short range (a maximum of
approximately 30 feet). When you pair a Bluetooth cell phone to the telephone
base, place your Bluetooth cell phone closer to the telephone base to maintain
sufficient signal strength. For optimal performance, keep your cell phone within
15 feet of the telephone base while using the cell line.
1. Choose a slot to pair the cell phone. Press and hold
on the telephone base until you hear a confirmation tone,
and the or
2. Turn on the Bluetooth feature of your cell phone. Once your cell phone finds
your VTech phone (
to continue the pairing process.
• Your cell phone may prompt you to enter the PIN of the telephone base.
The default PIN of the telephone base is
When the cell phone is connected to the telephone base, the corresponding status
icon ( or ) displays. The corresponding device light (
) turns on.
If the pairing fails, turn off the Bluetooth feature on your cell phone and on the
by pressing
above to pair and connect again. In some cases, it may take you a few attempts to
complete the pairing process.
• Adjust the volume during
message playback.
• Adjust the telephone base ringer
volume when the phone is not in use.
• Shows the number of messages, and
other information of the answering
system or telephone base.
• Play messages.
• Stop playing messages.
• Skip to the next message
• On when the answering system is on.
• On when the telephone base
is paired and connected with a
Bluetooth device.
• Flashes when the telephone base
is in discoverable mode.
, you must first pair and
light flashes.
), press appropriate key on your cell phone
.
or . Then repeat the steps
6
handsets
or
or