Table of Contents
Advertisement
IN CASE OF DIFFICULTY
Common Cure For Electronic
Equipment
Electronics, like people, can sometimes
get confused. If the unit does not seem
to be responding normally, then try
putting the Handset in the cradle. If it
does not seem to respond after trying
this a few times, do the following (in
the order listed):
1.
Disconnect the power to the Base.
2.
Disconnect (remove) the Handset
battery pack.
3.
Remove the base unit battery pack
where applicable.
4.
Walt a few minutes.
5.
Connect power to the Base.
6.
Install the handset battery pack.
7.
Install the base unit battery pack
where applicable.
8.
Place the handset in the base unit
cradle. If the handset has not been
recently charged, allow 8 hours
before use.
26
Advertisement
Table of Contents
