VTech VT1923 Manual page 10

GETTING STARTED
Setting the Tone/Pulse Switch
Set the TONE/PULSE switch, located
on the antenna side of the Base Unit,
to the desired dialing mode. In most
areas, TONE is the desired mode.
PULSE
TONE
After charging the battery pack, con-
nect the telephone line cord to a live
telephone outlet and the TEL. LINE
jack, located on the back edge of the
Base Unit.
If your Base Unit is not connected to
a live telephone outlet, the Handset will
display:
TELEPHONE
WALL JACK
For best results, raise the antenna on
the Base Unit and Handset when using
the phone.
10