Adjusting The Buffers In Mac Os X - Lexicon ALPHA Owner's Manual

ADJUSTING THE BUFFERS IN MAC OS X

1. Open Cubase LE and go to
Lexicon Alpha In/Out
2. Click on
3. Click on the Control Panel
lower settings will decrease any monitoring latency. If audio playback has
artifacts (clicking, popping), increase the setting slightly.
4. When you are finished, click
the results.
5. Repeat this process as many times as necessary until you find a buffer setting
that provides the lowest possible latency without digital artifacts.
Using the Alpha Studio – Adjusting the Buffer Settings
Devices>Device Setup
.
button. You can now select the buffer size. Selecting
Close , then OK and return to your project to test
.
22