5.14 EMI Shield
EMI shield
1. Prepare the computer for disassembly (Section 5.3).
2. Remove the top cover (Section 5.10).
3. Remove the keyboard (Section 5.13).
4. Remove the 12 screws securing the EMI shield to the base assembly
(Figure 5-20).
NOTE: There are three different-sized screws removed in this step: the
silver screws are removed/installed in location
screws are removed/installed in location
removed/installed in location
Also note that one of the silver screws
cable to the EMI shield.
Figure 5-20. Removing the EMI Shield Screws
EMI Shield
Spare Part Number Information
.
Removal and Replacement Procedures
176002-001
; the longer black
; the shorter black screw is
secures the display ground
5-23