Compaq 100 Series Manual page 12

Item Function
Internal Sets when an internal diskette drive is present.
FDC A check mark indicates that the item is
Enabled. An underline indicates Disabled.
Diskette Sets the type of diskette disk.
Drives
Internal Sets when an internal hard drive is present. A
HDC check mark indicates that the item is Enabled.
An underline indicates Disabled.
IDE Sets the type of hard disk drive in the system.
Settings
HDD Timing – Sets the data transmit mode of
the hard drive. The default is Ultra DMA-33.
I/O 32 bit Transfer – If enabled, allows for a
faster transfer rate. The effect is more
noticeable under DOS. The default setting is
Enabled.
HDD Block Transfer – If enabled, allows for a
large capacity hard disk. The default setting is
Enabled.
Virus Alert Provides warning messages if the hard disk
boot sector (partition table) has changed. A
checkmark indicates that the item is Enabled.
An underline indicates Disabled.
1-10 Product Description
Disks Menu
Default
Enabled
1.44MB
Enabled
N/A
Enabled