Lenovo ideacentre All-In-One Y910 Hardware Maintenance Manual page 38

Step 5. Loosen the screw that secures the graphic card module to the chassis.
Step 6. Slide out the graphic card module.
Step 7. Remove the graphic card holder.
Step 8. Remove the screws that secure the graphic card to the graphic card cover.
Step 9. Slide out the graphic card.
Step 10. To install the new graphic card:
a. Slide in and secure the graphic card to its cover with screws.
b. Reinstall the graphic card holder.
c. Slide in the graphic card module into position and secure it to the chassis by fastening the
screw in the graphic card holder.
Step 11. Reattach the right rear cover.
32
ideacentre All-In-One Y910 Computer Hardware Maintenance Manual
2
1
3
6
1
1
4 5