Auto Off; Power On Delay; Using Key Lock - HP LD4201 User Manual

3. Press the right arrow
hour (00h–23h).
4. Press the right arrow
minutes (00–59 min).
NOTE: In the event of a power interruption (disconnection or power failure), the Sleep Timer clock
must be reset.

Auto Off

To set the display to switch to the off mode automatically after 10 minutes if Auto Off is active and
there is no input signal:
1. Press the MENU button, and then use the down arrow
TIME menu.
2. Press the right arrow
the Auto Off menu.
3. Press the right arrow
On or Off.

Power On Delay

When connecting multiple displays and turning the power on, the displays are turned on individually
to prevent overload.

Using Key Lock

The display can be set up so you can only use the remote control. To lock or unlock the OSD screen
adjustment:
1. Press the MENU button, and then use the down arrow
OPTION menu.
2. Press the right arrow
the Key Lock menu.
3. To lock the OSD screen adjustment, press the right arrow
arrow
4. To unlock the OSD screen adjustment, press the MENU button on the remote control, and then
use the down arrow
ENWW
2nd Draft
button, and then use the down arrow
button, and then use the down arrow
button, and then use the down arrow
button, and then use the down arrow
button, and then use the down arrow
or up arrow button to select On.
or up arrow
or up arrow
or up arrow
button to select Off.
Using the On-Screen Display menu
or up arrow button to set the
or up arrow button to set the
button to select the
or up arrow button to select
or up arrow button to select
button to select the
or up arrow button to select
button, and then use the down
39