Energy Saving; Factory Reset; Scheduling; Clock - HP LD4201 User Manual

Energy Saving

Energy Saving is used to change the energy-saving mode.

Factory Reset

Factory Reset is used to reset the display to the factory default settings. Be careful with this option
because all settings will be reset.

Scheduling

The Schedule tab allows you to schedule the power on and off of the display.

Clock

Clock is used to set the current time of the display.
Select hour/minute/day, and then click
Click Set by PC Time to synchronize the clock of the display to the clock of the computer where
HP Network Sign Manager is installed.

Time Schedule Setting

Time Schedule Setting is used to schedule the power on/off of the display.
The following describes how to schedule the power on/off of the display:
1. Select an option in the Repeat Set drop-down list to set the power on/off schedule. You can set
it to Daily, Monday to Friday, Monday to Saturday, Saturday to Sunday, or day of week.
2. Set both On Time (time to turn the display on) and Off Time (time to turn the display off). You
can specify On Time and Off Time separately by selecting each checkbox as shown below.
3. Set an input setting to use when the display is turned on. Selecting No change will keep the last
input setting.
4. Check whether the monitor On/Off Time settings are correct, and then click Set to save the
changes. You can see your display on/off schedule added under On/ Off Time Schedule Info.

On/Off Time Schedule Info

On/Off Time Schedule Info is used to check and manage the power on/off schedule of the display.
To delete the on/off schedule of the selected display, select a schedule (time) to delete, and then
click Delete. The on/off schedules of all selected displays are deleted.
To delete all schedules, select a list to delete, and then click Delete All. All the selected display
on/off times are deleted.
ENWW
2nd Draft
Set to complete the time setting.
Display configuration
67