Brewing Coffee Now - Mr. Coffee BVMC-JWX12CUP 180024 User Manual

Jw series 12-cup coffeemaker
Table of Contents

Advertisement

Available languages

Available languages

BVMC-JWX12CUP_15ESM1.qxd:133834
filling, the water markings on the glass decanter and on
the water window show the amount of water needed to
make the corresponding desired number of cups. Do not
fill past the "12 cup MAX line" or water will flow out of
the overfill hole in the back of the coffeemaker.
The amount of coffee brewed will always be slightly less
than the amount of water poured in the water reservoir.
This is due to the minimum absorption of water by the
coffee grounds.
7. Lift the pour through reservoir lid and pour the water into
the water reservoir. Close the lid and place the empty
decanter onto the warmer plate.
NOTE: Make sure the decanter is fully placed on the
warming plate or the water and the grounds will overflow
from the filter basket. An overflow may cause personal injury
or damage to property.
CAUTION! To reduce the risk of damaging the
decanter and/or the risk of personal injury, do
!
not add cold water to the decanter if the
decanter is already hot. Allow the decanter to
cool before using.

BREWING COFFEE NOW

1. After completing the steps in the
Adding Water and Coffee section
and with the glass decanter and
the filter basket securely in place,
turn the coffeemaker on by
pressing the SELECT button once.
The BREW NOW green light will
turn on to signal that the
coffeemaker is on and brewing
(Figure 6).
14
1/28/15
2:35 PM
Page 14
F
6
IGURE
2. To enjoy a more full flavored cup
of coffee, press the Brew Strength
button once. The STRONG Brew
Strength red light will turn on. The
coffeemaker will remain in the
Brew Strength you have selected
until you change it back to regular
strength by pressing the Brew
Strength button or until you
unplug the machine (Figure 7).
3. After the used coffee grounds have cooled, carefully
remove the filter basket and discard them.
N N O O T T E E : : Always allow the coffeemaker to cool down
before cleaning.
4. Prior to making a second pot of coffee, turn the
coffeemaker off. This will reset the Fresh Brew™ Timer
feature. To turn the coffeemaker off, press the SELECT/OFF
button until all lights turn off.
5. Make sure the decanter is empty before starting to
brew coffee.
6. Be sure to turn your coffeemaker off when no longer
using it.
N N O O T T E E : : Scalding may occur if the lid is removed during
brewing cycles.
The Fresh Brew™ Timer Feature
The Fresh Brew™ Timer feature lets you know how long your
coffee has been waiting for you. At the start of the brew
cycle, The Fresh Brew™ Timer TIMER feature will automatically
be activated.
NOTE: Fresh Brew™ Timer display and Fresh Brew™ Timer
button not included on all JW series models.
F
7
IGURE
15

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

Table of Contents