Magneto Removal; Starter Clutch Removal; Starter Clutch Inspection - Yamaha FZ-16 2015 Service Manual

MAGNETO REMOVAL

1. Remove:
•Magneto rotor nut
Washer
•
NOTE:
•While holding the magneto rotor using the rotor
magnet holder "1", loosen the rotor magnet.
1
Magnet holder
YSST-601B
2. Remove:
•Rotor magnet "1"
(With the magneto puller "2")
•Woodruff key
CAUTION
To protect the end of the crank, placing a suitably
sized wrench between the extractor and the
crankshaft magnet.
NOTE:
Make sure the exhaust is centered on magneto
magneto rotor.
Magneto Puller
YSST-628
MAGNETO Y EMBRAGUE DEL ARRANQUE
2

STARTER CLUTCH REMOVAL

1. Remove:
•Starter clutch bolts "1"
NOTE:
•While holding the rotor magnet with magnet
holder, remove the starter clutch bolts "1"

STARTER CLUTCH INSPECTION

1. Check:
•The starter clutch rollers "1"
•Clutch Covers Spring Starter "2"
•Clutch springs engine
Boot "3"
Damage / wear Replace ‫ וי‬the clutch
boot.
5-28
1
1