Advertisement
INSTALLATION (SCP-3371/SNP-5300 SERIES)
3.
Connect the install base included in the PTZ camera to the housing for installation using
the 4 screws that are included as accessories.
4.
Fix the ANCHOR BOLT onto the concrete CEILING, and secure the SAFETY WIRE to the
ANCHOR BOLT as below:
❶
Tighten the NUT ("N1") on the ANCHOR BOLT.
➋
Insert the provided SAFETY BRACKET into the ANCHOR BOLT.
➌
Tighten two NUTs ("N2","N3") onto the ANCHOR BOLT.
➍
Hook and fi x one end of the SAFETY WIRE onto the SAFETY BRACKET.
➎
Hook and fi x the other end of SAFETY WIRE onto the HOUSING as shown below:
ANCHOR BOLT
앙카볼트
CEILING
천장
The ANCHOR BOLTs and nuts are optional and not included in the product package.
14_ SHP-3701F
Install Base Screw
인스톨베이스 스크류
Alignment Guide
하단 브라켓 위치표시
Marks of lower
bracket
Align the position mark on the lower bracket
with the screw direction on the install base, and
assemble them.
Nut (N1)
너트(N1)
ANCHOR BOLT
앙카볼트
Safety BRACKET
안전브라켓
Nut (N2,N3)
너트(N2,N3)
SAFETY WIRE
안전와이어
CEILING
천장
HOUSING
하우징
Advertisement
