INSTALLATION (SCP-3371/SNP-5300 SERIES)
1.
Place the TEMPLATE on the CEILING BOARD and drill a guided hole.
❶
Remove the round fi lling ("C") from the TEMPLATE.
➋
Place TEMPLATE A onto the CEILING BOARD to which you will attach the ceiling
mount ADAPTOR and drill a hole of Ø219mm in diameter.
See the fi gure below for the hole shape.
Ø219mm
TEMPLATE
형판
2.
See the fi gure below to fi x the lower BRACKET with the provided SCREWs.
The lower BRACKET is specifi c to "SCP-3430 Series/SNP-5300 Series".
Ø219mm
천장 보드
CEILING BOARD
SHP-3701F _13