Read And Observe And On Page 30 First; Operation; Information Overview - Skoda RAPID Owner's Manual

Operation


Read and observe on page 31 first.
Selecting and setting the data values can be actuated using the buttons on
the operating lever » fig. 16.
Description of the operation
Button Action
Briefly push up or down
A
Press briefly
B
Press and hold button

Information overview


Read and observe on page 31 first.
Information overview of the multi-function display (depending on vehicle
equipment).
Outside temperature
The current outside temperature is displayed.
Driving time
The time travelled since the memory was last erased is displayed.
The maximum distance indicated is 19 hours and 59 minutes. The indicator is
automatically set back to zero if this period is exceeded.
1)
Only valid for some countries.
32
Usage
Fig. 16
Buttons on the control lever
Operation
Select data / set data values
Show indication / confirm information
Reset MFA memory
Current fuel consumption
1)
You can use this information to adapt your driving style to the desired fuel
consumption.
The display appears in litres/hour if the vehicle is stationary or driving at a low
speed.
Average fuel consumption
The indication is calculated continuously since the memory was last deleted.
After erasing the memory, no data will appear for the first 300 m driven.
The indicated information is updated continuously while you are driving.
Range
The detail provides information about the distance in km that can be driven
with the current tank and with the same driving style.
If you drive more efficiently, this value can increase.
If the memory is set to zero (after disconnecting the battery), a fuel consump-
tion of 10 l./100 km is calculated for the range; afterwards the value is updated
according to the style of driving.
Distance travelled
The distance travelled since the memory was last erased is displayed.
The maximum distance indicated is 1999 km. The indicator is automatically set
back to zero if this period is exceeded.
Average speed
The indication is calculated continuously since the memory was last deleted.
After erasing the memory, no data will appear for the first 300 m driven.
Current speed
The display is identical to the display on the speedometer.
Coolant temperature
If the coolant temperature is in the range 80 - 110 C, the engine operating tem-
perature is reached.
If the coolant temperature lies below 80°C or above 110°C, avoid high engine
revs, full throttle and high engine loads.
