Panasonic EB-G50 Service Manual page 60

Personal cellular telephone

Hide thumbs Also See for EB-G50:

Table of Contents

PCB Repair Jig (Part No. 3WZ001102AAA)

The PCB Repair Jig provides the necessary connections between the PCB Assembly and external test equipment. It is

required for RF calibration.

Figure 7.1. : PCB Repair Jig

A cable with SMA female connector is provided to make the RF connection. An SMA to N-Type male adaptor will be required

to connect the Repair Jig to the service equipment. Cable loses for the RF connection are 0.5 dBm (GSM 900) and 0.8 dBm

(GSM 1800).

A replacement RF Probe for the Repair Jig is available as a spares item.

– 7–2 –

Table of Contents