Side Stand - Honda NSA700A 2009 Owner's Manual

Refer to
Saf ety Precautions
LEFT SIDE
(1)
(1) side stand spring
Check that the side stand assembly is
working properly. If the side stand is
stiff or squeaky, clean the pivot area
and lubricate the pivot bolt with clean
grease.
on page 92 . Check the side stand spring ( ) for
damage or loss of tension.
Check the side stand ignition cut-off
system:
1. Sit astride the motorcycle; put the
side stand up.
2. Start the engine and press and hold
the D (drive) side of N-D shift switch
to switch the transmission into D
mode.
3. Lower the side stand.
The engine should stop as you lower the
side stand. If the engine doesn't stop,
see your Honda dealer for service.
Servicing Your Honda

Side Stand

1
171