Table of Contents
Advertisement
4.
Remove clips B ( ), bolt A ( ) and
bolts B (
10
) and pull out the right under
cowl (
11
).
Carefully pull out the right under
cowl from around the rear brake
pedal (
12
) by moving it as shown in
the illustration.
(11)
(10)
(8) clips B
(9) bolt A
(10) bolts B
8
9
(12)
(9)
(8)
(11) right under cowl
(12) rear brake pedal
Under Cowl Removal
Installation
Installation can be done in the reverse
order of removal.
Carefully route the rear brake pedal
through the opening of the right under
cowl.
If either of the rubber caps came away
from the prongs when removing the
muffler cover, re-attach them.
Position the muffler cover so the prongs
are aligned with the hooks.
Install the bolts and tighten to the
specified torque:
step board mounting bolts:
19 lbf·ft (26 N·m , 2.7 kgf·m)
muffler cover bolts:
7 lbf·ft (9 N·m , 0.9 kgf·m)
Servicing Your Honda
117
Advertisement
Chapters
Table of Contents
