Yamaha Clavinova Owner's Manual page 11

8 [AC IN] connector (page 36)
For connecting the power cord.
9 [PEDAL] jack (page 36)
For connecting the pedal cord.
) I/O connectors (near side)
1 2 3
[INPUT VOLUME] knob (page 33)
1
For adjusting the input volume from microphone or
other devices connected to [MIC/LINE IN] jacks.
[MIC/LINE IN] jack (page 33)
2
For inputting the sound of a microphone, another
instrument, or audio player and listening to them
through the built-in speakers of the Clavinova.
[MIC/LINE IN] switch (page 33)
3
For proper setting of the input from a microphone,
another instrument or audio player.
[PHONES] jacks (page 18)
4
For connecting a set of headphones.
5 [AUX IN] jack (page 32)
For inputting the sound of an audio player and
listening to it through the built-in speakers of
Clavinova.
4 5
! I/O connectors (far side)
Right (higher-key side)
Front
1
(keyboard
side)
3
Left (lower-key side)
1 AUX OUT [R], [L/L+R] jacks (page 32)
For outputting the sound of the Clavinova to an
external speaker system.
2 [AUX PEDAL] jack (page 33)
For connection to a separately sold foot controller or
foot switch.
3 [USB TO DEVICE] terminal (page 31)
This terminal allows connection to the supplied USB
wireless LAN adaptor*.
*May not be included depending on your area.
Check with your Yamaha dealer.
MIDI [THRU], [OUT], [IN] terminals
4
(page 34)
Use MIDI cables to connect external MIDI devices to
these connectors.
CSP-170/CSP-150 Owner's Manual
2
4
11