Seagate SRPS20 User Manual page 56

You can add the 2.5-inch hard drive or SSD to an empty hard drive tray or replace an existing disk. Make certain
.that the capacity of the 2.5-inch hard drive is equal to or greater than the disk you are replacing
Remove a hard drive tray from the Seagate WSS NAS. It can be empty or filled with a hard drive you want .1
.to replace
If applicable, remove the hard drive by unfastening the four pins and extracting it from the tray .2
The hard drive tray has a 2.5-inch hard drive/SSD adapter switch on the bottom right (Image A). Push it .3
( . down (Image B
56 4/13/15 Seagate WSS NAS 2-Bay | 4-Bay | 6-Bay