Seagate SRPS20 User Manual page 36

.Connect the Ethernet cable to the NAS and the router .1
.Connect the power cable to the NAS and an active power outlet .2
:You can also connect
.A second Ethernet cable for redundancy or performance
Cable management: Careful management of cables is recommended for optimal operation. It

.prevents potential hazards and allows for easier maintenance
Step 2 – Power on the WSS NAS
.Push the power button on the front of the WSS NAS .1
36 4/13/15 Seagate WSS NAS 2-Bay | 4-Bay | 6-Bay