Table of Contents
Advertisement
1 Press OPTION.
2 Press 3 or 4 to select SOURCE, then press 2 to enter its
sub-menu.
3 Press 3 or 4 to select YPbPr or YCbCr according to your TV
setting.
4 Press OK to confirm.
To exit the component video mode, press and hold RETURN.
7 Troubleshooting
If it appears that the DVD-Video player is faulty, first consult this
checklist. It may be that something has been overlooked.
WARNING Under no circumstances should you try to
repair the set yourself as this will invalidate the guarantee.
If a fault occurs, first check the points listed, before taking the
set for repair. If you are unable to solve a problem by following
these hints, consult your dealer or service centre.
Symptom
No power
Distorted picture
Completely distorted
picture / no colour in
the TV screen
No sound
Remedy
• Check if both plugs of the mains cord are
properly connected.
• Check if there is power at the AC outlet by
plugging in another appliance.
• Check if battery pack is inserted appropriately.
• Check if car adaptor is connected appropriately.
• Check the disc for fingerprints and clean
with a soft cloth, wiping from centre to edge.
• Sometimes a small amount of picture distor-
tion may appear.This is not a malfunction.
The NTSC/PAL setting may be in the wrong
status. Match your TV's setting with the
player's setting.
Check audio connections. If using a HiFi
amplifier, try another sound source.
Advertisement
Table of Contents
