Table of Contents
Advertisement
ANALOG TV
To store a preset channel number
In the TV menu, when CHANNEL NO is highlighted, use 1, 2 to preset a
1
channel number.
2
To store the channel number, select STORE, then press OK on the remote
;
(2
on the set) to confirm.
➜ "OK" appears, and the preset number is stored.
TROUBLESHOOTING
If it appears that the DVD-Video player is faulty, first consult this checklist.
It may be that something has been overlooked.
WARNING
Under no circumstances should you try to repair the set yourself as this
will invalidate the guarantee.
If a fault occurs, first check the points listed, before taking the set for
repair. If you are unable to solve a problem by following these hints,
consult your dealer or service centre.
Symptom
Remedy
No power
– Check if both plugs of the mains cord are
– Check if there is power at the AC outlet by
– Check if the built-in battery is drained.
– Check if car adaptor is connected appropriately.
Distorted picture
– Check the disc for fingerprints and clean with
– Sometimes a small amount of picture distor-
Completely distorted
– The PAL setting may be in the wrong
picture / no colour in
the TV screen
No sound
– Check audio connections. If using a HiFi
properly connected.
plugging in another appliance.
a soft cloth, wiping from centre to edge.
tion may appear. This is not a malfunction.
status. Match your TV's setting with
the player's setting.
amplifier, try another sound source.
19
Advertisement
Table of Contents
