Philips PDCC-XP-0845 User Manual page 16

SETUP OPERATIONS
Display Type select display ratio
Brightness select brightness level
Contrast select contrast level
Press 1 to abort current settings or go back to previous menu level
Photo
When the cursor highlights these settings, press OK to:
Slide Show Frequency set the time between two photos
Slide Show Effect select 17 slide show modes
Display Format switch between Normal and Widescreen
Photo Display switch between Slide Show and Browse
Press 1 to abort current settings or go back to previous menu level
Custom
When the cursor highlights these settings, press OK to:
Parental Control select parental options
R
DivX VOD get DivX ID for VOD
Password change existing password (3308 by default)
Angle Mark select angle mark display options
Default restore factory settings
Press 1 to abort current settings or go back to previous menu level.
Notes: Parental options are only selectable when password mode is deactivated.
Before using the 3,4 keys to select your desired angle mark, ensure the
disc has been recorded with angle mark and you have enabled the angle
mark option in the system menu.
16
ANALOG TV
Before installation, please make sure that you are in an area with sufficient TV
signal coverage. As the TV signal is weaker in an indoor environment, please
always connect to a TV wall socket for the best reception quality when using it
at home or indoor.
Antenna connection
Before you start to search for TV channels, connect the DVD player to the anten-
na as shown.
• For best reception, please connect PET737 to the home antenna.
• Auxiliary antenna is used when there is excellent signal coverage. There is
magnet at the bottom of the auxiliary antenna. Fix it onto a metallic surface.
Setup your TV
1
In TV mode, press MENU.
➜ The TV menu is displayed.
Press 1, 2 to switch to PAL I.
2