Connecting a Router to the Network
Confirm that the router is powered off.
Step 1
Connect one end of the cable to the Gigabit Ethernet port on the router.
Step 2
Connect the other end to the BTS patch or demarcation panel at your site.
Step 3
Connecting Cables to SFP Modules
For information on connecting cables to Cisco optical and Ethernet SFP interfaces, see:
http://www.cisco.com/en/US/partner/products/hw/modules/ps5455/prod_installation_guides_list.html.
Connector and Cable Specifications
For more information on cable specifications and pinouts, see
Cisco ASR-920-24SZ-IM, ASR-920-24SZ-M, ASR-920-24TZ-M Aggregation Services Router Hardware Installation Guide
3-58
Chapter 3
Chapter 5,
"Troubleshooting".
Installing