Advertisement
Requirements
The rack rails supplied with your system are designed to be used with four post rack
enclosures. The rack rails mount between the posts and are designed to be quickly
installed.
In order for you to use the supplied rack rails, your rack enclosure must conform to the
following:
•
must be a 19 inch rackmount cabinet
•
must be at least 27 inches deep
•
must have square holes on the posts (sometimes referred to as, "rapid rack holes.")
•
must have a side clearance of 0.75 inches in between the posts, from square
mounting hole to square mounting hole.
Meaning if you take a (0.75 inch) wide by (5.75 inch) tall by (the amount of space
between the posts) length of wood and place it between the posts, it should not be
exposed in a way that would restrict you from sliding your system into your rack
enclosure.
If you are using a rack enclosure that does not have enough space to fit the
included rack rails, you can use either an L bracket or a rack shelf.
Correct type of four post rack enclosure
NOTE:
Fits between the posts
l e )
s c a
n t o
a w
t d r
( n o
StorTrends® 2401 Setup Guide
7
Advertisement
