Advertisement
SERVER PRECAUTIONS
•
REVIEW THE GENERAL SAFETY PRECAUTIONS.
•
DETERMINE THE PLACEMENT OF EACH COMPONENT IN THE RACK BEFORE
YOU INSTALL THE RAILS.
•
INSTALL THE HEAVIEST SERVER COMPONENTS ON THE BOTTOM OF THE
RACK FIRST, AND THEN WORK UP.
•
USE A REGULATING UNINTERRUPTIBLE POWER SUPPLY (UPS) TO PROTECT
THE SERVER FROM POWER SURGES, VOLTAGE SPIKES AND TO KEEP YOUR
SYSTEM OPERATING IN CASE OF A POWER FAILURE.
•
ALLOW THE POWER SUPPLY UNITS AND HARD DISK DRIVE TO COOL BEFORE
TOUCHING THEM.
•
ALWAYS KEEP THE RACK'S FRONT DOOR AND ALL PANELS AND
COMPONENTS ON THE SERVERS CLOSED WHEN NOT SERVICING TO MAINTAIN
PROPER COOLING.
•
WHEN REMOVING THE HARD DISK DRIVE, UNLOCK THE LATCH AND WAIT
APPROXIMATELY ONE MINUTE TO ALLOW THE HARD DISK DRIVE MOTOR TO
STOP BEFORE PULLING THE HARD DISK DRIVE OUT.
WARNING!
StorTrends® 2401 Setup Guide
5
Advertisement
