Predator Engines 69674 Owner's Manual & Safety Instructions
Predator Engines 69674 Owner's Manual & Safety Instructions

Predator Engines 69674 Owner's Manual & Safety Instructions

6500 watt 5500 running watts 6500 peak watts

Advertisement

Quick Links

Owner's Manual & Safety Instructions
Owner's Manual & Safety Instructions
Save This Manual
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
inspection, maintenance and cleaning procedures. Write the product's serial number in the back of the manual
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and
Keep this manual and the receipt in a safe and dry place for future reference.
the receipt in a safe and dry place for future reference.
using a generator indoors can KiLL yOu
using a generator indoors can KiLL yOu
in MinuteS.
Generator exhaust contains carbon
monoxide. this is a poison you cannot see
or smell.
neVer use inside
a home or garage,
eVen iF doors and
windows are open.
When unpacking, make sure that the product is intact and
When unpacking, make sure that the product is intact
undamaged. If any generator parts are missing or broken,
and undamaged. If any parts are missing or broken,
please call 1‑888‑866‑5797 as soon as possible.
please call 1‑888‑866‑5797 as soon as possible.
©
©
Copyright
2012 by Harbor Freight Tools
Copyright
2012 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Keep this manual for the safety warnings and precautions, assembly, operating,
Only use OutSiDe
and far away from
windows, doors,
and vents.
®
®
. All rights reserved.
. All rights reserved.
Visit our website at: http://www.harborfreight.com
email our technical support at:
productsupport@harborfreight.com
email our engine support at: predator@harborfreight.com
read this material before using this product.
read this material before using this product.
Failure to do so can result in serious injury.
Failure to do so can result in serious injury.
SaVe tHiS ManuaL.
SaVe tHiS ManuaL.
reV 16g

Advertisement

Table of Contents
loading

Summary of Contents for Predator Engines 69674

  • Page 1 Owner’s Manual & Safety Instructions Owner’s Manual & Safety Instructions Save This Manual Save This Manual Keep this manual for the safety warnings and precautions, assembly, Keep this manual for the safety warnings and precautions, assembly, operating, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the inspection, maintenance and cleaning procedures.
  • Page 2: Table Of Contents

    4. Set up and use only on a flat, level, work gloves, and dust mask/respirator during set up. well‑ventilated surface. 8. Use only lubricants and fuel recommended in this manual. Page 2 For technical questions, please call 1-888-866-5797. ITEM 69674...
  • Page 3: Operating Precautions

    Generator and interconnecting cables or conductors with any part of the body, or 6. Keep all spectators at least six feet with any non‑insulated conductive object. from the Engine during operation. ITEM 69674 For technical questions, please call 1-888-866-5797. Page 3...
  • Page 4 Do not modify the generator or its engine, and connections to avoid sparking or arcing. and do not use the generator for a These events could ignite fumes or vapors. purpose for which it is not intended. Page 4 For technical questions, please call 1-888-866-5797. ITEM 69674...
  • Page 5: Service Precautions

    7. Maintain labels and nameplates on while the smell of fuel hangs in the air. the equipment. These carry important information. If unreadable or missing, contact Harbor Freight Tools for a replacement. SaVe tHeSe inStructiOnS. ITEM 69674 For technical questions, please call 1-888-866-5797. Page 5...
  • Page 6: Specifications

    Fuel Valve DC Circuit Breaker AC Circuit Breakers AC Receptacles Choke Choke Air Filter Frame Starter Starter Ground Terminal Handle Power Switch Power Switch Low Oil Indicator Low Oil Indicator Page 6 For technical questions, please call 1-888-866-5797. ITEM 69674...
  • Page 7 WarninG! Connect tools and equipment only to the Receptacle (120 volt or 240 volt) that is compatible with the electrical characteristics and rated capacities of the tools and equipment being used. ITEM 69674 For technical questions, please call 1-888-866-5797. Page 7...
  • Page 8: Operation

    2. Close the Fuel Valve. 3. Clean the top of the Dipstick and the area around it. Remove the Dipstick by threading it counterclockwise, and wipe it off with a clean lint free rag. Page 8 For technical questions, please call 1-888-866-5797. ITEM 69674...
  • Page 9: Using The Generator

    Under normal operating conditions subsequent maintenance follows the schedule note: Do not allow generator to run explained in the SERVICE section. out of fuel with loads attached. ITEM 69674 For technical questions, please call 1-888-866-5797. Page 9...
  • Page 10: Starting The Engine

    Moving the Choke Lever too fast could stall the engine. START iMpOrtant: Allow the engine to run at no load for five minutes with no load after each start‑up so that the engine can stabilize. Page 10 For technical questions, please call 1-888-866-5797. ITEM 69674...
  • Page 11: Connecting Electrical Loads

    2. Adjust the plugs so the loads are shared across outlet circuits. to achieve rated output from the generator, distribute loads over outlets. ITEM 69674 For technical questions, please call 1-888-866-5797. Page 11...
  • Page 12 Central AC ‑ 10,000 BTU 1500 1500 For most lights or heaters: Furnace Fan ‑ 1/2 HP 1400 there are no additional start‑up watts. Space Heater 1800 Window AC ‑ 10,000 BTU 1200 Page 12 For technical questions, please call 1-888-866-5797. ITEM 69674...
  • Page 13 Stopping the engine under normal conditions 1. Before turning off the Engine, turn off all electrical loads, then unplug them. 2. Turn the Engine Switch off. 3. Close the Fuel Valve. ITEM 69674 For technical questions, please call 1-888-866-5797. Page 13...
  • Page 14: Maintenance

    4. Clean carbon build‑up from combustion chamber Replace fuel line if necessary Service more frequently when used in dusty areas. These items should be serviced by a qualified technician. Page 14 For technical questions, please call 1-888-866-5797. ITEM 69674...
  • Page 15: Checking And Filling Fuel

    In a well‑ventilated area away from bystanders, use pressurized air to blow dust out of the air filter. If this does not get the filter clean, replace it. ITEM 69674 For technical questions, please call 1-888-866-5797. Page 15...
  • Page 16: Spark Plug Maintenance

    Engine does not start. a. Change engine oil. b. Clean out area around spark plug. Remove spark plug and pour one tablespoon of engine oil into cylinder through spark plug hole. Page 16 For technical questions, please call 1-888-866-5797. ITEM 69674...
  • Page 17: Troubleshooting

    4. Engine valves or tappets 4. Have qualified technician diagnose/ mis‑adjusted or stuck. repair ignition system. Follow all safety precautions whenever diagnosing or servicing the equipment or engine. ITEM 69674 For technical questions, please call 1-888-866-5797. Page 17...
  • Page 18 2. Lower the number of items plugged into the generator to stay within the rated capacity, or use a more powerful generator. Follow all safety precautions whenever diagnosing or servicing the equipment or engine. Page 18 For technical questions, please call 1-888-866-5797. ITEM 69674...
  • Page 19 LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. ITEM 69674 For technical questions, please call 1-888-866-5797. Page 19...
  • Page 20: Parts List

    If product has no serial number, record month and year of purchase instead. note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Page 20 For technical questions, please call 1-888-866-5797. ITEM 69674...
  • Page 21: Assembly Diagram

    Diagram ITEM 69674 For technical questions, please call 1-888-866-5797. Page 21...
  • Page 22 Diagram (cont.) Page 22 For technical questions, please call 1-888-866-5797. ITEM 69674...
  • Page 23: Emissions Control System Warranty

    The warranty repairs or replacement should be completed in a reasonable amount of time, not to ex‑ ceed 30 days. If you have a question regarding your warranty coverage, you should contact HFT product support at 1‑888‑866‑5797 or productsupport@harborfreight.com. ITEM 69674 For technical questions, please call 1-888-866-5797. Page 23...
  • Page 24: Item

    GeneraL eMiSSiOnS Warranty cOVeraGe a) The warranty period begins on the date the engine or equipment is delivered to an ultimate purchaser. The warranty period is two years. b) HFT warrants to the initial owner and each subsequent owner that the engine is: Designed, built, and equipped so as to conform with all applicable regulations adopted by the Air Resources Board;...

Table of Contents