Set Up For Recirculation Mode - Miele DA 3466 Operating And Installation Instructions

Installation

Set up for recirculation mode

If site conditions are not suitable for the
hood to be used with air extraction, the
appliance must be set up for
recirculation. The DUU 151 conversion
kit, available from Miele, is required for
operating the hood in recirculation
mode. You will also need a charcoal
filter (see "Technical data").
A non-return flap is not used in
recirculation mode. Depending on the
model, it is already installed.
 Remove the non-return flap from the
exhaust connection.
40
 Install the conversion kit as described
in the installation instructions
supplied with the kit. Make sure that
the slats in the exhaust grille point
towards the centre of the room and
not towards a wall or the ceiling.
A non-return flap is not used in
recirculation mode.
 Insert the charcoal filter (see
"Cleaning and care").