Camera Operation; Rear Camera Operation; Displaying The Rear View Video While The Car Is In Reverse; Switching The Image Pattern For The Rear Camera - Alpine IVX-W200E Owner's Manual

Camera Operation

When an optional camera is connected, the view video of
camera can be output to the monitor.
Rear camera can be connected to this unit.
Depending on your camera, please choose the connection
method (Direct *or RCA).
* [Direct] is designed for HCE-C205RD Camera
(sold separately).

Rear Camera Operation

Displaying the rear view video
while the car is in reverse
1
Shift the gear lever to the reverse (R) position.
The rear view image is displayed while the car remains in
reverse.
2
If you shift the gear lever to a position other than
reverse (R), the monitor returns to the previous
screen.
• Never depend solely on the camera when backing up.
Always turn and look and only use the camera for
additional assistance.
• This function is effective when the reverse wire is
properly connected
Switching the Image Pattern for the
Rear Camera
If the camera has a view switch function, the Direct Change
switch is displayed.
1
Touch the screen when the image from the rear
camera is displayed.
The operation screen is displayed on the screen.
• After a 5-second time-out, the operation screen
returns to the camera display screen.
2
Touch [Rear], [Panorama], [Corner] or [Top]
The image pattern changes.
[Rear]: Rear View
[Panorama]: Panorama View
[Corner]: Corner View
[Top]: Ground View
• For detailed information about image patterns, see
the camera Owner's Manual.

Adjusting the Rear Camera Guide

You can adjust the camera guide position.
1
Touch [Setting].
The camera guide adjustment screen is displayed.
2
Touch the guide you intend to adjust.
Guide line can also be selected by touching
• For detailed information about image patterns, see
the camera Owner's Manual.
3
Touch
position of t he guide.
• Touching [Clear] clears adjustments and returns to the
setting before guide line alteration.
4
After the adjustment is completed, touch [Set].
Adjusting guides simultaneously (for Rear
camera only)
1
Touch [Link].
The 3 vertical guides of the currently-selected guide
link together, allowing them to be adjusted
simultaneously
Returning guides to default.
1
Touch [Default].
2
Touch [OK].
Adjusted values will return to default settings.
18
, , or
.
to adjust the