Remote Vehicle Start - Cadillac CT6 2017 Owner's Manual

Hide thumbs Also See for CT6 2017:
Table of Contents

Advertisement

2. Separate the two halves of the
transmitter using a flat tool
inserted into the bottom centre
of the transmitter. Do not use
the key slot.
3. Remove the old battery. Do not
use a metal object.
4. Insert the new battery on the
back housing, positive side facing
down. Replace with a CR2032 or
equivalent battery.
5. Align the front and back housing,
then snap the transmitter
together.
6. Reinsert the key.

Remote Vehicle Start

This feature allows the engine to be
started from outside the vehicle.
: This button will be on the RKE
transmitter.
The climate control system will use
the previous settings during a remote
start. The rear window demister may
come on during remote start based on
cold ambient conditions. The rear
demist indicator light does not come
on during remote start.
If equipped, the heated and ventilated
front seats may also come on when
the vehicle personalisation setting is
enabled. See Heated and Ventilated
Front Seats 0 62.
Laws in some local communities may
restrict the use of remote starters. For
example, some laws may require a
person using remote start to have the
vehicle in view. Check local
regulations for any requirements.
If your vehicle is low on fuel, do not
use the remote start feature. The
vehicle may run out of fuel.
KEYS, DOORS, AND WINDOWS
The RKE transmitter range may be
shorter while the vehicle is running.
Other conditions can affect the
performance of the transmitter. See
Remote Keyless Entry (RKE)
System 0 28.
Starting the Engine Using Remote
Start
1. Press and release
transmitter.
2. Immediately press and hold
for at least four seconds or until
the lamps flash. This confirms
the request to remote start the
vehicle has been received.
During the remote start, the
doors will be locked and the
parking lamps will remain on as
long as the engine is running.
The engine will shut off after
10 minutes unless a time
extension is done or the ignition
is put in ON/RUN/START.
3. Press the brake pedal and select
the ON/RUN/START ignition
mode to drive the vehicle.
33
on the RKE

Advertisement

Table of Contents
loading

Table of Contents