Display; System Lock; Warming Function; Power Level - Miele H 4080 BM Operating Instructions Manual

Display

The brightness and contrast of the oven
display can be adjusted by touching
the controls next to "Brightness" and
"Contrast".

System Lock

The oven can be locked.
The oven is set by default to
"Do not accept".
The display shows a lock which is
either open or closed. When selecting
the lock, it can be opened with "Off" or
closing with "On". The timer can still be
used.
The oven will remain locked after a
power failure.

Warming Function

The microwave has a built-in
keep-warm function which is activated
by default. Food which is not
immediately removed from the oven will
be kept warm for a short period of time.
The display shows "Keep warm".
The function can be deselected. The
"keep warm" function can not be set as
a separate function.

Power Level

The default power settings for
microwave and combined microwave
functions can be shown and adjusted.
Following microwave power levels
are available for microwave:
– At an electrical connection of 240V:
80 W, 150 W, 300 W, 450 W, 600 W,
850 W und 1000 W.
– At an electrical connection of 208 V:
80 W, 150 W, 300 W, 450 W, 600 W
und 850 W.
They are shown in a bar. The full bar
shows the maximum power. If only two
segments are shown the minimum
power is displayed.
Following microwave power levels
are available for combined functions:
80 W, 150 W, 300 W, 450 W
They are shown in a bar. The full bar
shows the maximum power of 450 W. If
only three segments are shown the
minimum power (80 W) is displayed.
Settings J
33