Trouble Shooting Guide - Sears C 249 29458 0 Owner's Manual

Problem
Monitor does not display Computer wire not connected
No speed or distance
displays on the monitor
No tension
Heart rate not displaying
Grinding
Squealing
Trouble Shooting
Cause
Sensor wire not connected
Sensor wire not working properly
Monitor not working properly
Tension control
w/cable not properly connected
Magnetic wheel not working
properly
Tension control w/cable defective
Pulse wire not connected
Hand pulse defective
Monitor not working properly
Crank bearing defective
Idler pulley defective
Mag wheel defective
V-belt slipping
20
Correction
Connect the computer wire
Securely plug the sensor wire into the
extension wire and at the back of the
monitor
Replace sensor wire
Replace monitor
Securely connect the tension control
with the extension tension cable
Replace magnetic wheel
Replace the tension control w/cable
Securely plug wires into the back of
the monitor
Replace hand pulse grip
Replace monitor
Replace crank bearings
Replace idler pulley
Replace magnetic wheel
Adjust v-belt
aurice Pincoffs Canada ©2013
M