Sd Card Setup; Alarm Output Setup; Station Setup - Samsung SmartCam+ Manual

Wi-Fi Setup
1. Press <Wi-Fi>.
Wi-Fi
A list of the wireless routers that
Wi-Fi
can be detected by the product
Please select product's Wi-Fi network.
is displayed.
2BCNI2
2. The wireless router connected to
ARGUSSTATION06XK
the camera can be changed.
iptime25

M
When Wi-Fi reception is poor,
Others
video reception may not be
smooth. Change the location of
the product and/or the router, and
increase its sensitivity for a better
user experience.
Event Schedule Setup
1. Press <Event Schedule>.
Event Schedule
2. Select your desired time and day
S
AM 00
of the week, and configure the 01
02
Event detection schedule.
03
04
05
3. If you want to delete a schedule,
06
07
press the screen again.
08
09
10
4. Press <Apply>.
11
PM 00
 01
M
When portrait mode is changed to
02
03
landscape mode, configuration
04
05
locations for time and day of the
06
07
week are switched with each other.
08
09
Event detection can be set between
10
11
00:00:00 and 00:59:59.

For the PT model, the privacy schedule setting has been
incorporated into the event schedule setting.

You must select the event schedule mode [
camera list to operate it by the set scheduled time zone.

SD Card Setup


J
Works only for models that support SD card.

SD cards should be purchased separately.

Please note that if an SD card that has been previously used for
other purposes is inserted into the camera, its data may be deleted.

Before you remove an SD card, you should eject it. If you do not eject
it first, the SD card may be damaged.
1. Press <Event>.
2. Various SD card settings can be
configured.
• Use SD card : Configures
whether the SD card is used
or not.
• Overwrite : When the SD card
is full, the oldest videos will
automatically be overwritten.
Armed Apply
M T W T F S • Continuous Recording :
Without event occurrences,
video will be stored on the SD
card.
• Status : Checks the SD card usage.
• Format : Deletes all of the SD card data.
3. Press <Apply>.
] icon from the

Alarm Output Setup

1. Press <Notification>.
2. Configures whether or not E-mail
push notifications are sent.
3. Configures the E-mail through
which Push notifications are sent.
4. Press the [
E-mail through which notifications
SD card
Apply will be received.
Use SD card
5. Press <Apply>.
Overwrite
M
Continuous Recording
Status Format
Size (usage/total)
26.81
/ 29.80 GB

Station Setup

Station Setup is applied only to the SmartCam A1 model.
M
Notification
Notification
Email (sending) setup (Google)
Email (receiving) setup Maximum of 5
] icon and add an

Up to 5 persons can receive
E-mails.
Camera Station Camera Station
Settings Settings Settings Settings
General Wi-Fi Event Schedule
General Video Event
SD card Notification

Detailed functions of the Station Setup menu are the same as those
of the SNH model. (refer to "6. Camera setup")
Apply