Table of Contents
Advertisement
10.
Select a product to register
from among the serial numbers
searched.
2
Select a product
M
When the smartphone and product
Select the serial number of the product
that you want to register.
are connected to the same router
The mobile phone and the product
should be connected to the same router
for the camera to be searched
network, the camera's serial
If product cannot be found?
number will be automatically
searched.
zef36v2ha0006xk
Cameras that have already been
registered are not searched.
If your camera does not appear on the list, enter your camera's serial
number directly.
11.
Enter <Name> and <Password>
and then press <OK>.
For security purposes, please set up a station name and
Name
Password
Confirm Password
1 to 8 alphanumeric characters
12.
You have successfully registered
the product.
With the SNH model, when you
For security purposes, please set up a station name and
For security purposes, please set up a station name and
press <OK>, the screen changes
mv Argus
mv Argus
to the camera live window.
•
•
For the SmartCam A1 model,
•
•
Your product has successfully been
press <OK>, and the camera will
The camera must be registered.
1 to 8 alphanumeric characters
1 to 8 alphanumeric characters
be registered.
M
Depending on the smartphone
default settings, the camera may
not be registered.
If this is the case, please check the
Help and try again.
3. Summary on main screen
Main screen
Setting a password
password.
Number
Menu
Camera
Name
Camera Setup Configures the product. (refer to "6. Camera setup")
Camera List
OK
SD event
playback
Setting a password
Setting a password
WATCH LIVE
password.
password.
SD playback
Camera Move
registered.
OK
OK
OK
CAM 01
WATCH LIVE
Description
You will be redirected to the configuration screen. (refer to
"8. Menu")
Displays the camera name.
Displays the camera list. (refer to "5. Camera list")
Swipe the screen from top to bottom, and check motion/
audio events that are stored on the SD card. (refer to "7.
Playback - SD event playback")
Connects to LIVE.
Swipe the screen from bottom to top, and move to the SD
playback menu. (refer to "7. Playback - SD playback")
Swipe the screen from left to right, and move to another
camera.
4. Monitoring
1.
On the main screen of the camera
to monitor, press <WATCH
LIVE>.
2.
If your password is not stored,
enter a password.
M
Download time may vary depending
on the policies or network
connection conditions of your
network provider.
Live Video
Number
Description
Previous
After terminating the Live connection, you are returned to
the main screen.
Stage
System
Security
Indicates Security Status for each of the cameras. (refer to
Status
"5. Camera list - Camera security mode setup")
Indicator
Displays the amount of camera battery remaining.
Battery
This is a function that is supported only for battery
Status
cameras.
Indicator
SmartCam A1 is displayed only when it is in move mode.
CAM 01
WATCH LIVE
01:00
Advertisement
Table of Contents
