Cadillac CTS Owner's Manual page 299

298 VEHICLE CARE
Using the Tyre Sealant and
Compressor Kit to Temporarily
Seal and Inflate a
Punctured Tyre
Follow the directions closely for
correct sealant usage.
When using the tyre sealant and
compressor kit during cold
temperatures, warm the kit in a
heated environment for five minutes.
This will help to inflate the tyre faster.
If a tyre goes flat, avoid further tyre
and wheel damage by driving slowly
to a level place. Turn on the hazard
warning flashers. See Hazard Warning
Flashers 0 157.
See If a Tyre Goes Flat 0 295 for other
important safety warnings.
Do not remove any objects that have
penetrated the tyre.
1. Remove the tyre sealant and
compressor kit from its storage
location. See Storing the Tyre
Sealant and Compressor Kit 0 302.
2. Unwrap the sealant/air hose (6)
and the power plug (8).
3. Place the kit on the ground.
Make sure the tyre valve stem is
positioned close to the ground so
the hose will reach it.
4. Remove the valve stem cap from
the flat tyre by turning it
anticlockwise.
5. Attach the sealant/air hose (6)
onto the tyre valve stem. Turn it
clockwise until it is tight.