Daily Use - Washing & Drying - Electrolux WTSL 6 E201 User Manual

Table of Contents

Advertisement

32
www.electrolux.com
2. Touch Start/Pause - Départ/Pause to
start the programme. The text bar
tells that the appliance is drying.
On the display appear the door locked
and the programme in progress
indicators.
The display shows alternatively, the
drying cycle duration and the time of the
cycle end.
The display updates regularly the drying
cycle value.
If the laundry is not sufficient
dry, set again a short drying
time.
12.4 At the end of the drying
programme
• The appliance stops automatically.
13. DAILY USE - WASHING & DRYING
WARNING!
Refer to Safety chapters.
13.1 NON-STOP programme
You can wash and dry your laundry
setting a «non stop-programme».
Proceed as follows:
1. Press button On Off for some
seconds to activate the appliance .
2. Load the laundry one item at a time.
3. Put the detergent and the additives in
the appropriate compartment.
4. Turn the programme dial to the
washing programme. The display
shows the default temperature and
spin. If necessary, change them
according to your laundry.
5. Set the available options.
13.2 Washing and Drying at
automatic levels
1. Touch button Automatik Trocknen -
Séchage automatique repeatedly
until the display shows the required
dryness level. The indicators above
the button illuminate accordingly:
• The acoustic signals operate (if they
are active).
• In the display
bar tells you that the programme is
completed.
• The indicator of button Start/Pause -
Départ/Pause goes off. The door
locked
goes off
• Press the button On Off for some
seconds to deactivate the appliance.
After some minutes from
the end of the
programme, the energy
saving function
automatically deactivates
the appliance.
1. Remove the laundry from the
appliance.
2. Make sure that the drum is empty.
a. IRON DRY level: 1 indicator on -
for cotton items;
b. CUPBOARD DRY level: 2
indicators on - for cotton and
synthetic items;
c. EXTRA DRY level: 3 indicators
on - for cotton items.
The display shows that the appliance is
ready to start.
The time value on the display is the
duration of both cycles washing and
drying, calculated on a default load
size.
To have a good drying by
using less energy and in a
shorter time, the appliance
does not let you set a too
low spin speed for the items
to be washed and dried.
2. Touch button Start/Pause - Départ/
Pause to start the programme.
The display shows the door locked
indicator and the programme in progress
indicator and, alternatively, the
drying time and the time of the cycle end.
The text bar tells that the appliance is
operating.
The display shows regularly a new time
value.
comes on. The text

Advertisement

Table of Contents
loading

Table of Contents