Table of Contents
Advertisement
To have your order filled promptly and correctly, please furnish the
following information.
1. MODEL NUMBER
3. PART NO.
MARK: SPARE PARTS-DELIVERY SECTION
Explanation of capacitors/resistors parts codes
Capacitors
VCC ....................... Ceramic type
VCK ........................ Ceramic type
VCT ........................ Semiconductor type
VC
MF ............... Cylindrical type (without lead wire)
VC
MN............... Cylindrical type (without lead wire)
VC
TV................ Square type (without lead wire)
VC
TQ ............... Square type (without lead wire)
VC
CY ............... Square type (without lead wire)
VC
CZ ............... Square type (without lead wire)
VC
J.. The 13th character represents capacity difference.
("J" ±5%, "K" ±10%, "M" ±20%, "N" ±30%,
"C" ±0.25 pF, "D" ±0.5 pF, "Z" +80-20%.)
If there are no indications for the electrolytic capacitors, error is ±20%.
CAUTION:FOR CONTINUED
PROTECTION AGAINST FIRE
HAZARD, REPLACE ONLY WITH
SAME TYPE F901 8A/125V
NOTE:
Parts marked with "
" are important for maintaining the safety of the set.
Be sure to replace parts with specified ones for maintaining the safety and performance of the set.
"HOW TO ORDER REPLACEMENT PARTS"
2. REF. No.
4. DESCRIPTION
For U.S.A. only
Contact your nearest SHARP Parts Distributor to order.
For location of SHARP Parts Distributor,
Please call Toll-Free;
1-800-BE-SHARP
Resistors
VRD ....................... Carbon-film type
VRS ........................ Carbon-film type
VRN ....................... Metal-film type
VR
MF ............... Cylindrical type (without lead wire)
VR
MN............... Cylindrical type (without lead wire)
VR
TV................ Square type (without lead wire)
VR
TQ ............... Square type (without lead wire)
VR
CY ............... Square type (without lead wire)
VR
CZ ............... Square type (without lead wire)
VR
J.. The 13th character represents error.
("J" ±5%, "F" ±1%, "D" ±0.5%.)
If there are no indications for other parts, the resistors are ±5%
carbon-film type.
ATTENTION:POUR ASSURER
UNE LONGUE PROTECTION CONTRE
UNINCENDIE, REMPLACER SEULEMENT
PAR UN FUSIBLE DE
TYPE F901 8A/125V
SD-AS10
Advertisement
Table of Contents
