Radio Waves - Alcatel 5044Y User Manual

In non-European Union jurisdictions:
Items of equipment with this symbol are not to be thrown into ordinary bins if
your jurisdiction or your region has suitable recycling and collection facilities;
instead they are to be taken to collection points for them to be recycled.
CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT
TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
• CHARGERS:
Mains powered chargers will operate within the temperature range of: 0°C to
40°C.
The chargers designed for your phone meet the standard for safety of information
technology equipment and office equipment use. They are also compliant with
the ecodesign directive 2009/125/EC. Due to different applicable electrical
specifications, a charger you purchased in one jurisdiction may not work in
another jurisdiction. They should be used for this purpose only.
Radio waves ���������������������������������������
Proof of compliance with international standards (ICNIRP) or with European
Directive 2014/53/EU (RED) is required of all phone models before they can
be put on the market. The protection of the health and safety for the user and
any other person is an essential requirement of these standards or this directive.
THIS DEVICE MEETS INTERNATIONAL GUIDELINES FOR EXPOSURE TO

RADIO WAVES.

Your phone is a radio transmitter and receiver. It is designed not to exceed
the limits for exposure to radio waves (radio frequency electromagnetic fields)
recommended by international guidelines. The guidelines were developed by
an independent scientific organisation (ICNIRP) and include a substantial safety
margin designed to assure the safety of all persons, regardless of age and health.
The radio wave exposure guidelines use a unit of measurement known as the
Specific Absorption Rate, or SAR. The SAR limit for mobile devices is 2 W/kg.
Tests for SAR are conducted using standard operating positions with the device
transmitting at its highest certified power level in all tested frequency bands.
The highest SAR values under the ICNIRP guidelines for this device model are:
9
5044Y
Maximum SAR for this model and conditions under which it was
Head SAR
Body-worn SAR
5044D
Maximum SAR for this model and conditions under which it was
Head SAR
Body-worn SAR
5044T
Maximum SAR for this model and conditions under which it was
Head SAR
Body-worn SAR
5044I
Maximum SAR for this model and conditions under which it was
Head SAR
Body-worn SAR
During use, the actual SAR values for this phone are usually well below the
values stated above. This is because, for purposes of system efficiency and to
minimise interference on the network, the operating power of your phone is
automatically decreased when full power is not needed for the call. The lower
the power output of the phone, the lower its SAR value.
Body-worn SAR testing has been carried out at a separation distance of 5 mm.
To meet RF exposure guidelines during body-worn operation, the phone should
be positioned at least this distance away from the body.
If you are not using an approved accessory ensure that whatever product is used
is free of any metal and that it positions the phone the indicated distance away
from the body.
recorded
LTE Band 1 + Wi-Fi 0.99 W/kg
LTE Band 1 + Wi-Fi 1.50 W/kg
recorded
LTE Band 1 + Wi-Fi 1.01 W/kg
LTE Band 1 + Wi-Fi 1.56 W/kg
recorded
UMTS 900 + Wi-Fi 0.82 W/kg
LTE Band 1 + Wi-Fi 1.55 W/kg
recorded
LTE Band 1 + Wi-Fi 0.88 W/kg
DCS 1800 + Wi-Fi 1.73 W/kg
10