Ariens 915213 – Zoom 42 Operator's Manual page 22

Interval Task
Check
Battery
Lubricate
Unit
25 Hours
or Every
Season
Check
Fasteners
Check
50 Hours
Carbon
or Every
Canister
Season
Filter
(Models
915209,
915233,
915235)
Check All
Belts
100 Hours
or Every
Season
Action
Keep battery and battery terminals clean. See Cleaning Battery and
Battery Cables on page 28.
1. Apply grease to zerk (1) on each front wheel.
2. Apply grease to quick adjust seat mechanism through slots (2) on
bottom side of seat plate. Work grease into mechanism by sliding
seat back and forth repeatedly.
2
Check mower blade mounting hardware and all other fasteners.
Replace fasteners that are missing or damaged. Tighten all nuts and
bolts to the correct torque values.
Clean or replace carbon canister filters whenever the engine air filter is
cleaned or replaced. See Carbon Canister Filter on page 29.
Replace worn or deteriorated belts.
• Check hydrostatic belt. See Replacing Hydrostatic Belt on
page 31 for hydrostatic belt location.
• Check PTO belt. See Replacing PTO Belt on page 30 for PTO
belt location.
EN - 22
1