Acer Aspire AM5610 Service Manual page 76

17. Connect the PA and PD power cable to the MB connector.
18. Connect the card read cable.
Note: When reassembling the Card Reader SKUs, the front I/O only supports 2 USB ports. The USB cable
from the DB is connected to USB Port1 on the MB and the Card Reader USB cable is connected to USB
Port2. See the table below for your reference:
SKU Status
W/I Card Reader
W/O Card Reader
70
USB Port1 USB Port2
USB cable1 CR USB cable
USB cable1 USB cable2
USB Port3
USB cable2
N/A
Chapter 3