Acer Aspire AM5610 Service Manual page 102

Important! Please do not fold the Serial ATA cable into 90-degree angle. Otherwise, data loss may occur
during transmission.
Fan Power Connectors: CPU_F2, SYS_F2
The fan power connectors support system cooling fan with +12V. When you connecting the wire to the connectors,
always take note that the red wire is the positive and should be connected to the +12V, the black wire is ground
and should be connected to GND. If the main board has a system hardware monitor chipset onboard, you must
use a specially designed fan with speed sensor to take advantage of the CPU fan control.
Important! Fan/heatsink with 3 or 4 pins are both available for CPU_F2. CPU_F2 supports fan control.
CD-In Connector: JCD2
This connector is provided for CD-ROM audio.
96
SATA cable
SATA power cable
SATA connector
SATA device
Chapter 5