Supero MicroCloud 5038ML-H12TRF User Manual page 85

S S
UPER ERVER 5038ML-H12TRF User's Manual
VT-d
Select Enabled to enable Intel Virtualization Technology support for Direct I/O VT-d
by reporting the I/O device assignments to VMM through the DMAR ACPI Tables.
This feature offers fully-protected I/O resource-sharing across the Intel platforms,
providing the user with greater reliability, security and availability in networking and
data-sharing. The settings are Enabled and Disabled.

PCI-E Confi guration
This item displays the information of the (graphics) device installed on a PCI-E
slot.
Micro-LP Slot
Micro-LP Slot-Gen X
This feature allows the user to select the PCI-E setting for the device in-
stalled on the PCI-E slot specifi ed. The options are Auto, Gen1 (Generation
1), Gen 2 and Gen 3.
Run-time C7 Allowed
Select Enabled for Run-time C7 support, which will allow the CPU to enter the
deep sleep state while the system is in operation to reduce power consumption.
(Note: Please be sure to restore the default settings and save appropriate end-
point settings for all components associated to this feature before you enable
this feature.) The options are Enabled and Disabled.
Detect Non-Compliance Device
Select Enabled for the AMI BIOS to automatically detect a PCI-E device that is
not compliant with the PCI-E standards. The options are Enabled and Disabled.
Program PCI-E ASPM After OpROM
PCI-E ASPM, the Active State Power Management for PCI-Express slots, is a
power management protocol used to manage power consumption of serial-link
devices installed on PCI-Exp slots during a prolonged off-peak time. If this item
is set to Enabled, PCI-E ASMP will be programmed after OpROM. If this item
is set to Disabled, the PCI-E ASPM will be programmed before OpROM. The
options are Enabled and Disabled.
Micro-LP Slot-ASPM
Use this feature to set the ASPM (Active State Power Management) level for the
device installed on the PCI-E slot specifi ed above. The options are Disabled,
Auto, ASPM L0s, ASPM L1, and, ASPM L0sL1.
7-12