Icom IC-718 Instruction Manual page 40

10
SET MODE
Level set mode (Continued)
Beep Level
Sets the key-touch beep output level from 0% to
100% in 1% steps. (default: 50%)
Beep Level Limit
Turns the beep tone output level limiting capability
ON and OFF for the confirmation and band edge
beep tones. (default: ON)
When this item is set to ON, the beep tones are
linked to the [AF] control until rotation of the [AF]
control reaches to the specified level—further rota-
tion will not increase the volume of the beep tones.
123
50 %
ON
• ON : Beep level is limited with the [AF] control.
• OFF : Beep level is linked to the [AF] control.