Lennox ED4540CNM-2 Homeowner's Care And Operation Instructions Manual page 10

ACCESSORY COMPONENTS
Brushed Stainless Finish Hood Kit 88L51
Brass Finish Hood Kit
Brass Hood Kits
Attractive hoods are available in two styles to
be used on the 4540 Series appliances. These
hoods are designed to be fitted to the face of
the appliance. In addition to providing an aes-
thetically pleasing appearance to your appli-
ance installation, the hood reduces heat ef-
fects to decorative mantles and finish materi-
als located above the fireplace opening. The
hood kit replaces the standard hood that comes
with these appliances and snaps into place.
These kits can be retrofitted to previously
installed appliances.
Touch-Up Paint (Charcoal) Kit
Touch-Up Paint Kit
Repair of minor scratches and discoloration of
the appliance black painted surfaces may be
accomplished with the touch-up paint kit.
10
EB45BS
96K69 EB45PB
Forced Air Blower Kits
-Single Speed
-Variable Speed with wall-mountable switch
-Variable Speed with unit-mountable switch
Forced Air Kit
The FBK-100 blower provides for a constant
velocity forced air circulation feature for your
appliance. The FBK-200 assembly with variable
speed wall switch provides a forced air circula-
tion feature for your appliance. The FBK-250
comes complete with a unit mountable switch
operating system.
90L74 TPK-C
Louver Kits
Brushed Stainless Finish
Brass Finish
Louvers Kits
Decorative louvers are available for use with all
4540 Series direct vent louvered-face appli-
ances. These louvers are designed to replace
the standard charcoal louvers that are pro-
vided with the appliance. The brass louver kit
includes eight (6) brass louvers. They provide
a touch of elegance to any 4540 Series appli-
ance. This kit can be retrofitted to previously
installed appliances.
NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE.
(FBK-200 Models Only)
80L84 FBK-100
80L85 FBK-200
Door Frame Kits
Brushed Stainless Finish
80L86 FBK-250
Brass Finish
Door Frame Kits
A decorative door frame kit is available for use
with these appliances. The DTK is designed to
attach directly to the front face of the appliance
at its extreme edges. The DTK provides a pic-
ture frame finish for the appliance. The door
frame kit can be retrofitted onto previously
installed appliances.
Bag of Glowing Embers
Bag of Glowing Embers
Replacement ember materials are available for
use with these appliances. Order a bag of Glow-
ing Embers, Model FGE to replace ember mate-
rials as part of the periodic maintenance of the
appliance.
88L34 LVR45BS
88L30 LVR45PB-2
90L71 DTK45BS
88L45 DTK45PB
88L53 FGE