Table of Contents
Advertisement
Useful Information
Problem
I cannot operate the answering
system remotely.
The unit does not emit the
specified number of rings.
Liquid damage
Problem
Liquid or other form of moisture
has entered the handset/hub.
Caution:
R To avoid permanent damage, do not use a microwave oven to speed up the drying process.
50
Cause/solution
R The remote access code is not set. Set the remote
access code (page 36).
R You are entering the wrong remote access code. If you
have forgotten your remote access code, enter the
remote access code setting to check your current code
(page 36).
R The answering system is turned off. Turn it on (page 37).
The answering system must be activated (page 33) in
order to turn it on remotely.
R If the first ring is turned off, the number of rings decreases
by 1 from the specified number of rings.
Cause/solution
R Disconnect the AC adaptor and telephone line cord from
the hub. Remove the batteries from the handset and
leave to dry for at least 3 days. After the handset/hub are
completely dry, reconnect the AC adaptor and telephone
line cord. Insert the batteries and charge fully before use.
If the unit does not work properly, contact an authorised
service centre.
Advertisement
Table of Contents
