Icom IC-U82 Service Manual page 6

SECTION 3
1. Removing the chassis panel
q Remove the knob A and jack cap B .
w Unscrew 1 nut C.
e Unscrew 2 screws D (2 × 10 mm, black) and 2 screws E
(2 × 4 mm, black) from the chassis.
r Unplug the speaker connector (J6).
t Take off the chassis in the direction of the arrow.
�
�
�
�
����� �����
DISASSEMBLY INSTRUCTIONS
�
�������
�� �������� ����������
2. Removing the MAIN unit.
q Remove the Jack seal F.
w Unsolder 4 points G of the shield cover.
e Unscrew 1 nut H and 2 screws I (2 × 4 mm, black).
r Unscrew 2 screws J (2 × 4 mm, black) and 3 screws K
(2 × 4 mm, silver) and remove the shield cover.
t Unsolder 2 points L.
y Unscrew 3 screws M (2 × 4 mm, silver).
u Take off the MAIN unit in the direction of the arrow.
J
G
I
L
H
G
3 - 1
K
F
M
Shield cover
MAIN unit
Chassis
Guide hole