HP A-MSR Series Configuration Manual page 19

Symptom 2
The router received a route from a neighbor router, but the route cannot be found using display ipx
routing-table verbose.
Solution
Use display current-configuration to check whether the maximum dynamic route number is configured

on a per network ID basis, with ipx route max-reserve-path. If it is not configured, the default value 4
is used.
Use display ipx routing-table verbose to check whether the existing dynamic route number under the

destination network ID has reached the maximum number.
 If the upper limit is reached, the newly received routes are not added to the routing table. Use ipx route
max-reserve-path to adjust the maximum number of dynamic routes.
16